Magento Commerce

Narrow Your Search

TV Size

Type

All

WMLU

***New!*** Wall mounted unistrut menu board brackets with plumb and tilt adjustment

WMLU

WMLU

***New!*** Wall mounted unistrut menu board brackets with plumb and tilt adjustment
The WMLU menu board flat panel display brackets provide an elegant solution to wall mounted unistrut applications. These brackets attach directly to 1-5/8 unistrut channels, allowing for fast and simple display installation. Plumb adjustment is achieved without the use of tools, ideal for situations involving uneven walls. Up to 18° of tilt allows for a variety of screen positioning for the perfect viewing angle. Supports displays weighing up to 120lbs with VESA patterns of up to 400mm high.
  • Fast and easy installation
  • Ideal for displays 30"-65"+
  • Attaches to 1-5/8 unistrut in minutes
  • Up to 18° of tilt adjustment for a variety of viewing angles
  • No tools required for plumb adjustment
  • Easily assembled by a single installer
  • Includes all necessary components and hardware
  • Supports displays up to 120lbs

***PATENT PENDING***

Model #ColorShip Weight
WMLUBlack 7
  • TV size range

    30” – 65”+

  • Weight capacity

    120lb (54kg) per screen

  • Max mounting pattern

    402mm high

  • VESA mounting patterns

    75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x200mm, 600x400mm, 800x400mm

  • TVs per configuration

    unlimited (priced per TV)

  • Depth from wall

    2.90” (74.5mm)

  • Tilt

    +18°

  • Mounting surface

    1-5/8 unistrut channel

  • Construction

    high-grade cold rolled steel

  • Product finish

    scratch resistant epoxy powder coat

  • Color

    black

  • Model number

    WMLU

  • Warranty

    10-years

  • Fast and easy installation
  • Ideal for displays 30"-65"+
  • Attaches to 1-5/8 unistrut in minutes
  • Up to 18° of tilt adjustment for a variety of viewing angles
  • No tools required for plumb adjustment
  • Easily assembled by a single installer
  • Includes all necessary components and hardware
  • Supports displays up to 120lbs
  • Q: Why is mounting to a single run of Unistrut an advantage?

    A: There are several reasons. First, using a single run of Unistrut greatly reduces measuring and alignment time because there is only a single stretch of strut. Second, using a Unistrut gives the installer more wall to work with to install electrical and low voltage plates behind the displays. And third, since many QSR installations involve a soffit, the low profile of a single Unistrut run allows the WMLU system to be installed while other systems using a wall plate, simply will not fit.


  • Q: My installation is on a soffit and the adjustable wall brake is lower than the ledge...what do I do?

    A: The adjustable wall brake is pre-installed at the lower position out of the box. There are two locations for the adjustable wall brake on each bracket. Simply reposition the adjustable wall brake to the upper position on all brackets in your system prior to hanging the displays.


  • Q: What exactly does the adjustable wall brake adjust?

    A: The adjustable wall brake micro adjusts the bottoms of displays to ensure a perfect alignment. Simply turn the knob by hand after the display is hung to make the micro adjustment.


  • Q: What happened to the vertical leveling adjustment?

    A: It is simply not needed. Because all displays are hung from a single track of Unistrut, the tops of the displays will be level and there is no need to make further adjustments.


  • WCM200

    WCM200

    Cord management accessory (also 200 mm bracket)